Russian

Products Category

Flexible Drive Shaft

Silicone Rubber Sheet

Silicone Diaphragm / Solar

Silicone Vacuum Bag / Glass

Power Transmission Flat Belt

Silicone Membrane / Woodworking

News

• Flexible Shaft

• How to Thermoform Solid Surfac

• Vacuum Membrane Thermofoil Pre

• Solar PV Module Panel Laminato

• Lamination: Key to module dura

Contact Us

Name: Jason
Tel: +86-170 7086 8515
Fax: +86-510-6864650
Mobile: +86-170 7086 8515
E-mail: jason.wang@durney.net, mailjason@yeah.net
Add: 58#, Kongrou Rd, Wuxi city, Jiangsu, 214000 P.R.China
Skype: dongmsg

Home > Products > Silicone Diaphragm / Solar > Masking Tape for glass module edge sealing

Masking Tape for glass module edge sealing

Product name：Masking Tape for glass module edge sealing

Item：GT55

Details：

Temporary edge sealing

During the encapsulation process of frameless double glass modules, there is a need for single-sided tapes to prevent contamination of the equipment and form an aesthetic edge. Upon the process' completion, the tape needs to easily remove from the module.

GT55 masking tape, similiar to the tesa® 50600

Good immediate adhesion
High temperature resistance
Good removability after lamination process

PET Masking Tape 220°C with Silicone Adhesive

Product description

GT55 is a green-translucent, high-temperature masking tape featuring a polyester backing with a silicone adhesive. GT55 is used for various applications, especially for masking during powder-coating processes, surface protection applications or bonding and splicing of non-polar materials. GT55 masking tape is also available in a version with a liner.

Product Features

GT55 is also available on a special 50 μm thick PET liner (50600 PV1)
Residue-free removability for masking and surface protection applications
The high-temperature tape features easy application and easy one-piece removal without leaving residues behind
The tape enables sharp color edges and offers excellent paint anchorage.
The masking tape's silicone adhesive system makes the tape extremely heat-resistant, withstanding extreme temperatures of up to 220°C for as long as 30 minutes at a time.

Application Fields

GT55 is ideally suited for masking off areas that are to be protected during powder-coating processes
The high-temperature tape can withstand temperatures of up to 220°C for 30 minutes
GT55 is used for suface protection applications or bonding and splicing of non-polar materials
The masking tape features residue-free removal

Product Construction

Backing material	PET
Total thickness	80 µm
Type of adhesive	silicone

Properties / Performance Values

Easy to remove	yes
Temperature resistance (30 min)	220 °C
Elongation at break	110 %
Tensile strength	75 N/cm
Dielectric breakdown voltage	4000 V
Sharp color edge	yes
Hand tearability	low